The DM 20 drilling machine is designed to make holes for entering the VSCD 300-800 video surveillance and control device into the pipeline. Installation of the DM 20 drilling machine is carried out on the FS G 32 fitting, through a 1 1/4 ”ball valve.
The DM 150 drilling machine is used to hot tapping into pipelines through temporary valves and is designed to be used in conjunction with straight fittings and tee fittings.
Additionally, the DM 150 drilling machine is equipped with a set of threaded adapters that are used to connect it to gate valves and sandwich valves with threaded connections, as well as a set of flange adapters for installing the drilling machine on flanged valves.
| DM 20 | DM 150 | |
|---|---|---|
| Cutting diameter, mm | 22 | 19-142 |
| Working pressure, MPa (depending on customer requirements (from 0.6 to 10.0 MPa)) | 2.4 | 2.4 |
| Shaft working stroke, mm | 190 | |
| Environment working tempera- ture, 0С | -40...+110 | -40...+110 |
| Rotation drive (use of a hydraulic actuator is allowed (not included in the delivery set)) | manual | manual |
| Feed drive | manual | manual |
| Height, mm | 635 | 1150 |
| Weight, kg | 14 | 22 |
| Art. № | TTS0520-Р | TS0525-Р |
| Applicability DМ 20 | Applicability DМ 150 | Art. № | |
|---|---|---|---|
| Pilot drill 6.35 mm | TS0606 | ||
| Pilot drill 10 mm | TS0607 | ||
| Hole saw cutter 19 mm | TS0608 | ||
| Hole saw cutter 21 mm | TS0609 | ||
| Hole saw cutter 22 mm | TS0610 | ||
| Hole saw cutter 46 mm | TS0611 | ||
| Hole saw cutter 51 mm | TS0612 | ||
| Hole saw cutter 60 мм | TS0613 | ||
| Hole saw cutter 64 мм | TS0614 | ||
| Hole saw cutter 70 мм | TS0985 | ||
| Hole saw cutter 76 мм | TS0615 | ||
| Hole saw cutter 95 мм | TS0616 | ||
| Hole saw cutter 98 мм | TS0617 | ||
| Hole saw cutter 121 мм | TS0495 | ||
| Hole saw cutter 140 мм | TS0169 | ||
| Hole saw cutter 142 мм | TS0170 |
